If you asked homeowners to describe their bathrooms in one word, we bet the first thing that pops in their minds would be tiles. Tiles have proved their worth, and for this, they have become part of the bathroom. If there’s one thing you would never go wrong with integrating into your bathroom, it’s tiling. From floors, showers, tubs to walls have the versatility to make it all work. The durability and waterproof features of tiles have made them worth the investment in a bathroom remodel. However, with time tiles get damaged, the grout loosens, and they need replacement. A bathroom remodel is a chance to take out the old and get new tiles for the bathroom.
Replacing your bathroom floor tiles will not be an easy job. Remember, they have been there for years, so it would take a lot on your part, especially if you are doing it alone. Hiring a bathroom remodeler for the project will make things easier for you and ensure proper reinstallation. Still, determined to go at it alone? Here are some cold truths to give you a better understanding of what the process will entail.
The Old Tiling Has To Go
Let’s rip the band-aid off by addressing the most challenging part of the floor replacement. Getting the old tiling out won’t be easy, but you can work your way around the room, beginning with areas where there is a gap. While some homeowners prefer leaving the old tiling in place but this is not recommended. Removing the old tiling entirely will allow you to examine the subfloors and check whether there is any damage to them before putting in the new tiles. You can also hire a professional bathroom remodeler to do it for you.
2. Get A Waterproof Subfloor Installed
Bathroom flooring is not just the top surface we admire when we walk into the bathroom. It also consists of the subfloors underneath. Any homeowner planning to reinstall their floor space should leave no stone unturned. Having waterproof subfloors is just as crucial as having water-resistant floors. Ultimately when the grout loosens or the tiles crack, you do not want water seeping through the floors to cause damage. Better be safe than sorry by getting subfloors that are not affected by moisture.
3. Lay The Tiles Out Before Installation
It would be inconvenient if you were halfway into the remodeling when you realize your tiles do not fit? This is why it is essential to do this beforehand. With planning, you may have an estimate of how many tiles you might need, but this is a chance to test the theory. Laying out your tiles will give you an exact of the required number of tiles and where you will need to make cuts for the tiles to fit perfectly in the bathroom.
4. Wait A Day Before Stepping on Floors
Homeowners tend to assume that once the new tiles are placed, reinstallation is done, and most of them are ready to go back to their routine. However, this cannot be any far from the truth. Leaving the grout lines unsealed is a call for disaster. First, you need to give your tiles time to dry; this way, when you put weight on them during sealing, they do not become crooked. Twenty-four hours should be enough for the tiles to dry and hold.
5. Give Your Floor Time To Dry
Tiling is complete, and you cannot be happier to use your revamp bathroom. Before your hard work goes to waste, you need to give the grout seal time to dry. For the best results, wait for the grout lines to dry before taking your bathroom remodel for a test run.
With all the information you should know about replacing your bathroom tile flooring, you should be able to weigh in whether you are up to the task. If tile reinstallation proves to be a lot to handle, you can seek our help. With our contracting, you will be in the hands of experts with tons of bathroom remodeling experience. Receive a quote for the project and leave all the heavy lifting to us.